Draconia Malfoid by Tentacle Studio: the +18 figure of Harry Potter in 1/6

The piece of Draconia Malfoid 1/6 signed by Tentacle Studio is a Figure +18 The scale is 1/6, the declared height is around 23 cm and the pre-sale opens on November 6, 2026, with an estimated release of the third quarter of 2027. The edition is limited to 128 units.

What distinguishes this figure from Tentacle Studio is the double configuration: the Smile Version shows the girl with a smile, while the EX Version adds a plate with the tongue out and allows the piece to be assembled in two ways. This double assembly, together with the detachable elements of the EX variant, places it as a showcase piece for collectors of +18 figures who value detail over the single piece.

Draco Malfoy 1/6 from Tentacle Studio, figure +18 sitting with the wand close to the lap
Front view of Figure +18 from Tentacle Studio.
  • Study: Tentacle Studio
  • Character: Draconia Malfoid (Draco Malfoy), female version
  • Franchise/IP: Harry Potter
  • Scale: 1/6, 23 cm high
  • Material: Imported PU and high-end resin
  • Versions: Smile Version and EX Version (Smile + Tongue-out)
  • Pre-sale: November 6, 2026
  • Release: Third quarter of 2027
  • Full price: USD $287.00 – USD $476.00 (Smile: USD $287.00; EX: USD $476.00)
  • Reservation with deposit: USD $48.00
Tentacle Studio Figure +18 Overview on Turned Brown Pedestal
Presentation on the column pedestal.

This is the figure of Draconia Malfoid 1/6 from Tentacle Studio

The figure appears seated, with the legs wide open, one knee bent and raised, the torso slightly tilted back and the right hand holding a thin black wand close to the lap. The expression changes according to the plate: the base version smiles, while the images of the variant with the tongue out show this gesture. On the face, the black earrings and the work of the eyes and lips stand out, with a soft shine on a matte-looking ensemble.

Blonde girl face with black earrings and regular version smile
Detail of the smiling face.

The clothes are an open black tunic with green lining, without a top, accompanied by a green and black striped tie and dark brown high stockings with white oval spots. The nails are painted green and the nudity is frontal: the breasts and nipples are exposed or covered by square black patches with emblem, depending on the variant, and the vulva is shown uncensored in the piece itself. In one of the variants there is also a green snake next to the genital area.

Open black tunic with green lining, striped tie and high waist stockings
The open tunic and stockings with oval spots.

Two bases can be seen: a round brown pedestal with a turned column and a tree trunk base with the coiled green snake. The modeling combines leather and fabric with a matte finish, and the set is completed with a black wand and an intense green snake. The material declared by the study is imported PU and high-end resin, and on the tongue plate outside the lower area and the pieces that cover the nipples are removable.

Seated figure with legs open and one knee raised on the trunk base
The pose opened from another angle.

Regular version

The Smile Version is the entry point: 1/6 with 23 cm high, 13 cm wide and 12 cm deep, with the blonde girl smiling and the wand in her hand. In the images she alternates her chest in the air with the square black patches and can rest on the pedestal of turned column.

Chest detail with square black patches and matte leather finish
Variant with patches on the nipples.

EX version

The EX Version adds to the previous one a plate with the tongue out, so that the figure can be mounted in two ways. Its measurements go up to 23 cm high, 15 cm wide and 15 cm deep, and on this plate the lower area and the pieces that cover the nipples can be removed. It is the option that allows you to change the gesture of the piece without buying two figures.

Variant with the tongue out and green snake coiled at the base
Plate with the tongue out and trunk base.

Draconia Malfoid Price and Presale

Pre-sale opens on November 6, 2026 and is scheduled for launch in the third quarter of 2027. Full prices at ORZGK range from $287.00 to $476.00: the Smile Version costs $287.00 and the EX Version costs $476.00. There is also a deposit of USD $48.00 that corresponds only to the pre-sale reservation, not to the total amount of the figure. ORZGK’s file.

Draco Malfoy de Tentacle Studio: la figura +18 de Harry Potter en 1/6
FIGURA +18
Disponible en ORZGK

Draco Malfoy de Tentacle Studio: la figura +18 de Harry Potter en 1/6

Consigue esta figura desde la página de ORZGK.

USD $287.00 – USD $476.00Tentacle Studio
Reserva con depósito: USD $48.00
Comprar ahora
EX Version plate with tongue out and detachable parts
EX configuration detail.

Who is Draconia Malfoid in Harry Potter

Draco Malfoy is one of the characters in the Harry Potter saga, and Tentacle Studio uses him to build this feminine reinterpretation of blonde hair. The winks are in the clothing: the black tunic with green lining, the green and black striped tie, and the thin wand that the figure holds close to the lap, along with the snake that appears in one of the bases. The piece is presented within the studio’s author’s design line and not as a literal reproduction of the character.

Side view of figure +18 with black wand and green nails
The wand and the green nail polish.

Is Draconia Malfoid figure from Tentacle Studio worth it?

At 1/6 and 23 cm high, the piece works well in a display case: the open pose and the inclination of the torso force you to look at it from the front, and the two types of base allow you to adapt the height and environment of the display. The finish is contained, with matt leather and fabric and occasional shine in the eyes and lips, and the wand and snake provide fine lines that are usually the first to be noticed when the mold is well resolved.

Set of the figure on a pedestal with turned column and detail of the snake
Full set with the snake.

The real complexity is in the double assembly of the EX and in the detachable pieces, which require care when changing configurations and a hole in which to store the plate that is not used. It is a figure for those who collect +18 pieces of recognizable characters and enjoy reconfiguring the showcase, rather than for those who are looking for a closed figure that does not touch. The high-end PU and resin point to an object of exhibition, not of frequent manipulation.

Detail of tree trunk base with green snake from figure +18
The snake coiled at the base of the trunk.

Leave a comment

Your email address will not be published.